Fiberflass composite materials application

In recent years, as to further improve the performance of chemical products and the continuous improvement of the manufacture craft, non-metallic materials is finding wider and wider application in car body, plastic, rubber and other new materials, are increasingly into the family car.

In terms of the use of car parts, is widely used on the car body nonmetallic material has glass steel pieces, people familiar with the "Chinese bullet" of the shell is made of glass fiber reinforced plastic, the Chevrolet bullet body shell also USES the glass fiber reinforced plastic material.

Starting in the 80 s extensive use of glass fiber reinforced plastic material body, such as  Fiar cars outside of glass fiber reinforced plastic sheet molding compound wing plate, back cover, and QianHouMen and polycarbonate and modified polyphenyl ether manufacturing front and rear bumpers, inside body parts such as wing.

www.unicomposite.comUNICOMPOSITE

Britain's four cars, and even adopted the glass fiber reinforced plastic body (unsaturated polyester glass fiber reinforced plastic).

Body local toughened glass has a popularization in our country, such as bumper, hood and large camber shape complex body parts, etc.

With the development and utilization of raw materials, glass fiber reinforced plastic materials in the application of cars is increasing.

Carbon Fiber Sheet

Carbon fiber sheet, including carbon fiber cloth and carbon fiber board, mainly used in building reinforcement, from twentieth Century 60's to the present, it has been widely used. It has a high specific strength, high specific modulus, resistance to hundreds of thousands of degrees Celsius temperature, acid and alkali, and other chemical substances are also very good corrosion resistance.
Different from pultruded sheet, carbon fiber cloth manufacturing method is not complicated, the carbon fiber is woven into cloth. Carbon fiber board manufacturing method is according to the required size and thickness, the carbon fiber cloth to stack up the pre impregnated resin, and then the high temperature pressed into plate. That is, when the critical pre coating reinforcement, effect. Carbon fiber materials woven carbon fiber cloth, the carbon fiber wire is difficult to fully work together, when subjected to load, the part should be at higher force levels of carbon fibers first reached the tensile strength and from the working state, and the use of pre coating, the concrete surface in all the directions of the strain transfer to carbon fiber cloth, the carbon fiber can work very well and greatly improve the tensile strength of the carbon fiber cloth.
The construction method of carbon fiber sheet is more simple than the use of other materials. First, the need to strengthen the site clean, coated with resin, and then put on a carbon fiber sheet. Large machinery, a lot of manpower and material resources are not needed, construction cycle is short,and  the effect is significant.

Carbon Fiber Sheet

Carbon fiber sheet, including carbon fiber cloth and carbon fiber board, mainly used in building reinforcement, from twentieth Century 60's to the present, it has been widely used. It has a high specific strength, high specific modulus, resistance to hundreds of thousands of degrees Celsius temperature, acid and alkali, and other chemical substances are also very good corrosion resistance.
Different from pultruded sheet, carbon fiber cloth manufacturing method is not complicated, the carbon fiber is woven into cloth. Carbon fiber board manufacturing method is according to the required size and thickness, the carbon fiber cloth to stack up the pre impregnated resin, and then the high temperature pressed into plate. That is, when the critical pre coating reinforcement, effect. Carbon fiber materials woven carbon fiber cloth, the carbon fiber wire is difficult to fully work together, when subjected to load, the part should be at higher force levels of carbon fibers first reached the tensile strength and from the working state, and the use of pre coating, the concrete surface in all the directions of the strain transfer to carbon fiber cloth, the carbon fiber can work very well and greatly improve the tensile strength of the carbon fiber cloth.
The construction method of carbon fiber sheet is more simple than the use of other materials. First, the need to strengthen the site clean, coated with resin, and then put on a carbon fiber sheet. Large machinery, a lot of manpower and material resources are not needed, construction cycle is short,and  the effect is significant.